Cleaning
12
Cleaning
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short circuit.
− Make sure that no water penetrates the housing of the solar
panel.
− Never immerse the solar panel in water.
NOTICE!
Risk of damage!
Improper handling of the product may result in damage.
− Do not use any aggressive cleaners, brushes with metal or nylon
bristles, or sharp or metallic cleaning utensils such as knives,
hard scrapers and the like. They could damage the surfaces.
1. Disconnect the power plug
14
from the power connector
13
before cleaning.
2. Regularly change the water in the jug
5
and bowls
6
/
7
.
3. Use a damp cloth to wipe off the stand, jug, bowls and solar panel
15
. Then let all
parts dry completely.
Cleaning the pump
The components of the pump
12
can be disassembled for regular cleaning to ensure
optimum performance.
1. Disconnect the power plug
14
from the power connector
13
before cleaning.
2. Gently pull the filter housing
18
to remove it from the pump. Then remove the
filter
19
from the filter housing (see step 1 in Fig. I).
3. Slightly rotate the water outlet
11
clockwise and then detach it from the pump.
Remove also the impeller
20
from the pump (see step 2 in Fig. I).
4. Clean the filter housing, filter, water outlet and impeller under running water.
Attach them back to the pump after cleaning.