ALDI OL215 - ABS Anti-Blocking System; General Instructions; Operating Guidelines; Getting Ready to Laminate

6 AFTER SALES SUPPORT
www.monolith-support.com 1 877-386-8264
MODEL: OL 215 PRODUCT CODE: 91816 03/15
Laminator User Guide
ABS Anti-Blocking System
Your laminator is equipped with an Anti-Blocking System. If the pouch was not
inserted straight or it becomes jammed in the machine, push the ABS switch
6
toward the left. You can then take the laminating pouch and its contents out of the
machineandreinsertthedocumentinanewpouchintothelmfeedslot
4
.
General instructions about the laminator
Please read the manual before using the machine.
Please note! Whenusingthemachine,youmaynditgivesoffa
slightodour.Pleaseensurethereissufcientventilationintheroom,
e.g. by opening a window.
A laminator is not a toy.
Keep it locked away from children!
Getting ready to laminate
- Site the machine so that there is enough space to insert the laminating
pouches (in other words, not right in front of a wall or other objects).
- Insert the plug into an earthed power socket (120 V = domestic power supply).
- Switch the machine on using the ON/OFF switch.
- SelecteitherhotorcoldlaminationbyippingtheHOT/COLDswitch
2
to the
desired position.
Note: Your laminator supports lamination of 3mil and 5mil (80mic and
 125mic)lmwithoutmode-switching.
- The ready indicator
3
will turn from blue to red once the laminator has
reached the correct temperature.
The preheating time can vary depending on the ambient temperature
and air humidity.