ALDI OL215 - Laminating Best Practices; Post-Lamination Procedures; Machine Maintenance; How to Laminate

AFTER SALES SUPPORT 7
1 877-386-8264 www.monolith-support.com
MODEL: OL 215 PRODUCT CODE: 91816 03/15
Laminator User Guide
General tips on laminating
After laminating
1. Set the on/off toggle switch
1
to “off”.
2. Pull the mains plugs from its socket.
3. Leave the machine to cool before storing.
Cleaning the rollers
1. Switch on the machine.
 2. FoldasheetofA4paperandinsertthis,foldededgerst,intothepouch
feed tray
4
.
Keep repeating this process until no more glue deposits cling to the paper.
Cleaning the machine
1. Always remove the mains plug from its socket before cleaning the machine.
2. Let the machine cool down.
3. Always clean the machine with a soft cloth. Use neutral cleansing
agents, never abrasives.
- Please note! Only take one pouch per lamination, as pouches stick
tightly together. Place the document that you wish to laminate between
 thetwosidesofthelaminatingpouch.Ensurethatitliesushwiththe
closed edge.
- Insertthelaminatingpouchclosed-edge-rstintotheslot
4
on the back of
the machine. The rollers will automatically pull the pouch in and transport it to
the output slot
5
on the front of the machine. Don’t use force to pull out the
samples. In the event of jamming, see the ABS section.
- Let the pouch cool for a bit, and then it’s ready.
- If the laminating pouch has not adhered properly to the paper, repeat the
process.
How to laminate