− If the power cord of the paper shredder is damaged, the
manufacturer, its customer service team or a person with
similar qualifications must replace it.
− Do not open the housing; instead, have a qualified professional
perform repairs. Contact a qualified workshop for this. Liability
and warranty claims are waived in the event of repairs
performed by the user, improper connection or incorrect
operation.
− Only parts that comply with the original device data may be
used for repairs. This device contains electrical and mechanical
parts which are essential for providing protection against
sources of danger.
− The paper shredder must not be operated with an external
timer or separate remote control system.
− Do not immerse the paper shredder or power cord in water or
other liquids.
− Never touch the power plug with wet or damp hands.
− Do not use the paper shredder if you are standing on a wet
floor, or if your hands or the paper shredder are / is wet.
− Do not pull the power plug out of the socket by the cord;
instead, always pull it out by the plug itself.
− Never move, pull, or carry the paper shredder by its power
cord.
− Keep the paper shredder and power cord away from open
flames and hot surfaces.
− Lay the power cord so that it does not pose a tripping hazard.
− Do not kink the power cord and do not lay it over sharp edges.
− Do not bend the power cable and do not wrap it around the
paper shredder, as this may lead to a broken cable.
− Only use the paper shredder indoors. Do not use the paper
shredder in damp rooms or in the rain.
− Never store the paper shredder such that there is a risk of it
falling into a tub or sink.
To Next Page
Loading...
Need help?
General
