What to do if my ALDI Easy Home 91796 is jammed?
If your ALDI Paper Shredder stops due to a paper jam, it likely means you've tried to shred too much paper at once. To resolve this, set the slide switch to the REV (Reverse) position and carefully pull the paper out of the slot.
Why is my ALDI Paper Shredder not turning on when I insert paper?
If your ALDI Paper Shredder doesn't start when you insert paper, it might be because the paper wasn't inserted correctly, preventing the automatic paper sensor from activating. Ensure the paper is properly aligned in the slot to activate the sensor.
What to do if my ALDI Paper Shredder switches off during operation?
If your ALDI Paper Shredder isn't working when you feed paper or it switches off, the paper might be too thin, soft, wet, or creased to activate the paper sensor reliably. Try these steps: 1. Fold the paper and feed it again. 2. Set the slide switch to REV (Reverse) position.
How to remove paper snippets stuck in my ALDI Paper Shredder?
If you find snippets of paper sticking to the discharge point of your ALDI Paper Shredder after shredding, it indicates that shredded paper is trapped in the blade slots. Set the slide switch to the REV (Reverse) position if necessary and remove any paper residues at the discharge point.
Covers electrical safety, connection requirements, and basic handling precautions.
Precautions regarding the power cable, avoiding water exposure, and plug safety.
Warnings about keeping the shredder away from children and vulnerable persons.
Safety measures to avoid injury when feeding paper or using the shredder.
Instructions for connecting power and activating the shredder to standby mode.
Instructions for shredding paper, including operating time and common blockage causes.
Instructions for shredding CDs/DVDs, including operating time and bin emptying.
General| Brand | ALDI |
|---|---|
| Model | Easy Home 91796 |
| Category | Paper Shredder |
| Language | English |
To Next Page
