− Stop using the laminator if its plastic parts exhibit cracks or
breaks or are deformed. Only replace damaged parts with
corresponding original spare parts.
− Only laminate at room temperature (approx. 10–25°C).
− Never insert metallic objects (e.g. paper clips, staples etc.) or
objects other than laminating pouches which are intended for
this laminator into the laminating pouch infeed slot.
− The laminator has vents. Never cover them with other objects
such as magazines, blankets or similar.
First use
Checking the laminator and product contents
NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a sharp
knife or other pointy object, you may quickly damage the lamina-
tor.
− Therefore, be very careful when opening.
1. Take the laminator out of the packaging.
2. Check whether the laminator or the individual parts exhibit damage. If this is the
case, do not use the laminator. Contact the manufacturer at the service address
specified on the warranty card.
3. Check to make sure that the delivery is complete (see fig. A).
Setting up the laminator
1. Position the laminator so that there is enough space to insert a laminating
pouch
6
. Do not position the laminator directly in front of a wall or other objects.
2. Connect the mains plug to a properly installed socket with a protective conductor
(230V = house connection).
To Next Page
Loading...
