ALDI Stirling HTJ-2108-G - Water Tank Cleaning & Descaling; Dust Filter Cleaning

Cleaning
18
Cleaning and descaling the water tank
1. Unscrew the water tank cap
10
from the water tank
2
and remove any deposits
or dirt particles that have collected in the water tank (seeFig.B).
Wipe off limescale deposits with a damp cloth and, if necessary, use a little vinegar
to dissolve the limescale.
2. Then rinse the water tankand the water tank cap with clear water.
Cleaning the control unit
− Use a damp cloth to wipe off limescale deposits inside and on the surface of the
control unit
3
. If necessary, use a little vinegar to dissolve the limescale.
Cleaning the air vent
1. Use a damp cloth to wipe off the air vent
17
on the control unit
3
(seeFig.E).
If necessary, use a little vinegar to dissolve
the limescale.
2. Let the air vent dry completely.
Cleaning the essential oil pad
− Wash the essential oil pad
5
with warm water and let it dry completely before
reinserting it (seeFig.A).
Cleaning the dust filter
1. Remove the water tank
2
from the control unit
3
and put it aside (seeFig.A).
2. Carefully pour out any leftover water in the control unit.
3. Turn the control unit upside down (seeFig.3). Push in the bottom cap
19
, turn it
to the left, and remove it from the bottom opening
18
.
4. Remove the dust filter
20
and wash it with warm water. Let it dry completely
before using it again.
5. Push the bottom cap in and turn it to the right to close the bottom opening again.
3
17
E
3
Control unit
17
Air vent