ALDI Stirling HTJ-2108-G - Maintenance Procedures; Replacing Silver Ion Filter

Maintenance
19
3
Control unit
19
Bottom cap
18
Bottom opening
20
Dust filter
OPEN
CLOSE
18
3
19
20
3
Maintenance
Changing the silver ion ball filter
• The silver ion ball filter ensures that there are no germs in the
stagnant water.
• The silver ion ball filter should be replaced after 160 hours of oper-
ation. Otherwise, it will lose its effectiveness.
• Only use original silver ion ball filters.
1. Remove the water tank
2
from the control unit
3
and put it aside (seeFig.A).
2. Remove the old silver ion ball filter
21
from the slot in the control unit and
replace it with a new one (seeFig. F).
3. Put the water tank with the vapour
absorption unit
14
facing downwards
onto the control unitagain.
Spare filters ordering instructions
You may order additional filters for the product (seeFig.G):
− Send an email to order@wkfe.com.hk and advise the quantity you would like to
order. The filters come in packs of 3.
− Please advise your full name, email, delivery address and contact number.
3
21
F
3
Control unit
21
Silver ion ball filter