16
AFTER SALES SUPPORT
1300 886 649
info@tempo.org
AUS
MODEL: STR-5F80L PRODUCT CODE: 700805 04/2020
Instructions
Selecting an oven function
• Use the FUNCTION control knob to select your required oven function.
(Please refer to the table opposite for a description of the functions.) The
appliance will utilise different elements within the oven cavity depending on
the oven function selected.
Setting a temperature
• Use the TEMPERATURE control knob to set the required temperature for
cooking or baking in the oven, turning the knob in clockwise direction.
The temperature can be regulated within a range of 50–250°C.
• Unless your recipe states otherwise, always wait until the oven is hot
before placing food inside the oven chamber. The oven has reached the set
temperature when the thermostat light goes out for the rst time.
• When the oven is not in use, make sure the TEMPERATURE knob is in the
OFF [o] position.
IMPORTANT: For the oven to start cooking, you have to set the function and
temperature as well as the timer – or set the timer to Manual cooking mode.
IMPORTANT!
Setting the function and temperature does NOT switch on the oven.
You must set the timer as well (or set it to manual mode) for the oven to switch on.
Switching the oven on and off
• To switch on the oven you need to set the required oven function and
cooking temperature and timer (or manual) mode.
• To switch off the oven, set both FUNCTION and TEMPERATURE control
knobs to the OFF [o] position.
Selecting a function and temperature
FUNCTION
TEMPERATURE
Fig. 3
To Next Page
Loading...