150W Bench Grinder
AFTER SALES SUPPORT
1300 889 028
(toll free)
AFTER SALES SUPPORT
(toll free)
150W Bench Grinder
e-mail: info.aldi@positecgroup.com1300 889 028
MODEL No.: DG75A • 07/2019 • 10275
16
If t
he grinder suddenly brakes completely or jams,
it must be switched o immediately.
Set the eye shields (1) so that they provide the
greatest possible protection during use.
- To start the tool, press in the on/o switch to
position “I”.
- To stop the tool, press in the on/o switch to
“O”. (See Fig. H)
8.3 Variable Speed control (8)
Set a speed suitable for the work using the variable
speed control (8). (See Fig. I)
Rotate the variable speed control (8) clockwise to
increase the speed.
Rotate the variable speed control (8) anticlockwise
to decrease the speed.
8.4 Grinding
Place the workpiece on the tool rest (11). Guide
the workpiece slowly towards the grinding wheel
(12) at the required angle until the workpiece and
the grinding wheel (12) come into contact with
each other.
Move the workpiece evenly backwards and
forwards in order to achieve optimal results.
This also ensure that the grinding wheel (12)
is worn down more evenly.
Note: The direction of rotation of the tool is
per Fig. J.
Notes on working with materials/tools/speed range.
Never use the appliance for other purposes and only use original parts/
accessories. Using attachments or accessory tools other than those
recommended in the operating instructions can lead to a risk of injury.
H.
I.
J.
DECREASE
SPEED
INCREASE
SPEED
START
STOP
10275 ALDI IM Ed3.indd 18 8/05/2019 2:50 PM
To Next Page
Loading...
Need help?
General
