150W Bench Grinder
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: DG75A • 07/2019 • 10275
(toll free)
AFTER SALES SUPPORT
(toll free)
150W Bench Grinder
1300 889 028
MODEL No.: DG75A • 07/2019 • 10275
1
7
Determine the rotational speed range for working on zinc, zinc alloys,
aluminium and copper by trying it out on test pieces.
Use a low rotational speed for work on plastics and materials with a low
melting point.
Use a high rotational speed for working on wood.
Carry out cleaning, polishing and bung work in the medium speed range.
If you exert too much pressure, the tted tool can break and/or the
workpiece could be damaged. You will achieve optimum working
results by moving the tool over the workpiece at a steady speed and
while exerting light pressure.
WARNING! RISK OF INJURY! Always pull out the plug before
adjustment, maintenance or repairing the appliance.
NOTE: Always clean the grinder immediately after nishing work.
Use a dry cloth to clean the housing.
Under no circumstances should you use fuel, detergents, solvents or
abrasive cleaners.
Ensure ventilation openings are always free.
Remove any adhering grinding dust with a brush.
Storage
Store the grinder in a dry and dust-free location.
Store the brushes somewhere dry and not in the vicinity of aggressive
media.
The grinding wheels must be stored in a dry location and should not
be stacked.
Store the accessories so they are protected from damage.
Store out of the reach of children.
9. Maintenance and cleaning
10275 ALDI IM Ed3.indd 19 8/05/2019 2:50 PM
To Next Page
Loading...
Need help?
General
