General power tool safety warnings
5. Service
a. Have your power tool serviced by a qualied repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
Bench grinder safety warnings
a. Do not use a damaged accessory. Before each use, inspect the
accessory such as abrasive wheels for chips and cracks After
inspecting and installing an accessory, position yourself and
bystanders away from the plane of the rotating accessory and
run the power tool at maximum no-load speed for one minute.
Damaged accessories will normally break apart during this test time.
b. The rated speed of the accessory must be at least equal to the
maximum speed marked on the power tool. Accessories running
faster than their rated speed can break and y apart.
c. Never grind on the sides of a grinding wheel. Grinding on the side
can cause the wheel to break and y apart.
6. Important information – Product care
Care MUST be taken to ensure both the safety and life of the pack is
maintained. Ensure you have read all of the safety notes in the previous
pages before using the 150W Bench Grinder.
7
10275 ALDI IM Ed3.indd 9 8/05/2019 2:49 PM
To Next Page
Loading...
Need help?
General
