Glue Gun
AFTER SALES SUPPORT
(toll free) MODEL No.: PGG72H • 07/2019 10282
e-mail: info.aldi@positecgroup.com
AUS
13
1300 889 028
AUS
unlikely event of such an occurrence, or if you require any information
about the product please contact us via our after sales support services,
details of which can be found in this manual and on the product itself.
After Sales Support TEL: 1300 889 028
Service Support
If you have any issues with the operation of your product, please call our
Customer Service on 1300 889 028 for advice, or email us at
info.aldi@positecgroup.com
Environmental protection
Recycle unwanted materials instead of disposing of them as
waste. All tools, hoses and packaging should be sorted, taken to
the local recycling centre and disposed of in an environmentally safe way.
FAQ/Troubleshooting
Fault Cause Remedy
1. After power
on for 5 min,
the glue gun
stays cool.
1.1 Damaged power
switch / socket.
1.2 The heater is broken.
1.1 Change to another
switch / socket.
1.2 Contact customer
service.
2. The glue
gun is not
dispensing glue
normally during
use.
2.1 Check to see if the
glue gun is cool.
2.2 The nozzle is blocked.
2.1 Follow the Remedy
1.1 and 1.2.
2.2 Contact customer
service.
For further inquiries or issues associated with your glue gun, call our
Customer Service on 1300 889 028 or email us at
info.aldi@positecgroup.com
To Next Page
Loading...