Glue Gun
AFTER SALES SUPPORT
(toll free) MODEL No.: PGG72H • 07/2019 10282
e-mail: info.aldi@positecgroup.com
AUS
9
1300 889 028
AUS
WARNING! Please read and understand this instruction
manual before use and keep it for your future reference.
Your glue gun should only be passed on together with this
instruction manual.
Assembly
Installing a glue stick (see fig. A)
WARNING. Disconnect the glue gun from the mains power
supply before making any adjustments or undertaking
maintenance procedures.
1. Insert the provided glue stick (2) into the glue stick entry (8).
2. Squeeze the flow control trigger (5) multiple times to allow the glue
stick (2) to be pushed down.
A
Operation
1. Switching on/off (see fig. B)
To put into operation
1) Insert the power plug into the mains power supply, and turn the
power switch on.
2) Place the gun on the support stand / rest (6). Allow the gun to heat
up for approximately 3 min before beginning work.
To Next Page
Loading...