18
18
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
YLW6281D • 700234 • 01/2020
NOTE: Do not submerse the HEPA filter in water. Do not use a
damp cloth to clean.
6) After finishing cleaning of HEPA filter (13), put it back on the
appliance head (5) by aligning the two notchs on the HEPA filter
(13) onto the two notches on the filter basket (20). (See Fig. H4).
Then replace the lock/unlock plug in the HEPA filter (13) by inserting
the bottom two sides sockets of the lock/unlock plug into the
grooves of the HEPA filter (13).(See Fig.H5). Rotate the lock/unlock
plug clockwise to lock the HEPA filter (13) onto the appliance head
(5) firmly. (See Fig. H6).
7) Re-install the appliance head (5).Refer to 7.1.
H4 H5 H6
H1
H2 H3
1
2
To Next Page
Loading...
