17
17
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
info.aldi@positecgroup.com
YLW6281D • 700234 • 01/2020
9. Maintenance
WARNING: Remove the battery pack (1) from the wet &
dry vacuum before carrying out any adjustment,
servicing or maintenance.
• Always store your power tool in a dry place. Keep all working
controls free of dust.
• We recommend that you clean and dry the appliance immediately
after each use.
9.1 Cleaning the appliance head (5)
• Clean the appliance head (5) regularly with a damp cloth and
some soap followed by wiping down and drying before storing
away.
• Do not submerse the appliance head (5) in water or allow water to
enter the appliance head (5).
• Do not use cleaning agents or solvents. These may be aggressive
to the plastic parts on the appliance.
9.2 Cleaning the tank (6)
• The tank (6) can be cleaned with a damp cloth and soap or rinsed
under running water depending on the amount of dirt. Wipe down
and dry before storing away.
9.3. Cleaning the HEPA filter (13)
1) Remove the appliance head (5). Refer to 7.1.
2) Put the appliance head (5) upside down. (See Fig. H1).
3) Unlock the middle lock/unlock plug of the HEPA filter (13) by
turning it in an anti-clockwise direction. (See Fig. H2).
4) Set aside the lock/unlock plug. Remove the HEPA filter (13) by
pulling it up. (See Fig. H3)
5) Clean the HEPA filter (13) regularly by carefully patting it and
cleaning it with a fine brush or hand brush (not supplied).
To Next Page
Loading...
