5
2.3 ICONS ON THE DISPLAY:
upper part of the display, during normal use
indicates the reception strength:
strong reception
good reception
average reception
bad reception
minimum reception
, , or indicates which camera you’re wat-
ching, when using only one camera this is always
indicates that the ‘surveillance mode’ is enabled (only
applies when using multiple cameras, the images are
shown one after the other)
indication that the zoom mode is activated
indicates that the IR lighting is enabled for night
vision
volumesetto0(speakerturnedo)
, , , or : indication of the set VOX level (auto-
matic activation when the baby is crying), for this refer to
chapter 4.3
temperature display of the baby room
battery indication:
battery is empty
battery is full
> > > animation while the battery is
charging
appears when the adaptor is connected and the bat-
tery is not or incorrectly installed
icons on the display during setup:
in this menu, you can set the display brightness
in this menu, you may set the feeding timer, for this
refer to chapter 4.3
To Next Page
Loading...
Need help?
General
