24
ADDITIONAL FUNCTIONS
CHANGING THE TRANSMIT/RECEIVE CHANNEL:
1. Press
once, the channel indicator will start flashing.
2. Press the
or button to select the desired channel
3. Press the PTT button to confirm
CALLING (PAGING) TONE:
To page another PMR you can generate a pager alert tone.
1. Press the
button
2. Page alert tone is generated for 2 seconds.
ROGER BEEP:
As soon as you release the PTT key, the PMR generates
an alert tone. This is to let you know that the transmission
button has been released, and the other person can speak.
This alert tone is always on and cannot be switched off.
SCANNING FOR CHANNELS:
If the scan function has been enabled, the PMR
automatically scans all channels until it receives a signal.
1. Press simultaneously on the
and buttons until
SC appears on the display and the channels are sear-
ched. As soon as a signal is detected, the device stops
scanning.
2. Press the
or button to resume scanning.
3. Press the PTT button to stop scanning or to start com-
munication.
4. Press the
or button to resume scanning.
To Next Page
Loading...
