Alecto FR-14 - Monitoring and Key Lock; Monitoring Function; Key Lock

25
5. Simultaneously press the and , buttons to stop
the scan function. SC disappears from the display.
MONITORING FUNCTION:
To receive signals that are very weak you can disable noise
suppression. You will then receive all the signals on that
particular channel, including interference.
1. Simultaneously press the
and obuttons to start
the monitoring function.
2. Press the
button to stop the monitoring function.
KEY LOCK:
Press and hold the
button for 2 seconds to enable the
key lock; press and hold the
button again for 2
seconds to disable the key lock (enabled: MENU,
and
buttons are blocked and the symbol lights up)