-34-
INDOOR UNIT SETUP
Time and date:
The WS-1200 is provided with a built-in DCF receiver, used for receiving the
DCF time signal from Frankfurt.
You can also set the time manually. As soon as the DCF time is being
received, the indoor unit will automatically overwrite the time you’ve set
manually.
• Press and hold the “SET” button for 3 seconds until the language option
starts ashing. If you’re in a different time zone than the DCF clock signal,
you can use this option to change the time zone. For example, if you’re 1
hour ahead of the DCVF time, you can set the time zone to +1.
• Press the “+” or “-” button to adjust the time zone.
• Press the “SET” button to continue to the next setting.
• 24 hours or 12 hours time format.
• Press the “+” or “-” button to switch between 24 hours or 12 hours format.
• Press the “SET” button to the hours.
• Press the “+” or “-” button to set the correct hours.
• Press the “SET” button to set the minutes.
• Press the “+” or “-” button to correct minutes.
• Press the “SET” button to set the year.
• Press the “+” or “-” button to set the correct year.
• Press the “SET” button to set the month-date or date-month format.
• Press the “+” or “-” button to set the format.
• Press the “SET” button to month.
• Press the “+” or “-” button to set the correct month.
• Press the “SET” button to set the date.
• Press the “+” or “-” button to set the correct date.
• Press the “+” or “-” button to correct minutes.
• Press the “SET” button to set the temperature display to ºC or ºF.
• Press the “+” or “-” button to switch between ºC and ºF.
• Press the “SET” button to set the rain format mm or inch.
• Press the “+” or “-” button to select, mm or inch.
• Press the “SET” button or don’t press any button for 10 seconds to exit the
programming mode.
You can also press and hold the “+” or “-” button for over 3 seconds to adjust
the values quicker.
To Next Page
Loading...
Need help?
General
