8
4. OPERATION
4.1 Basic functions:
The display shows the following basic functions/data:
1. illuminates when the battery of the indoor unit is running low
2. display of the actual time
3. illuminates when the alarm clock is set to ice alert (see chapter 5)
4. illuminates when the DCF clock radio signal is being received
5. illuminates when the daylight saving time is enabled
6. display of the moon status (*1)
7. display of the day of the week
8. illuminates when using the MAX/MIN button to display the maximum or minimum values (*2)
9. illuminates when the alarm clock is set (see chapter 5)
10. display of the date
11. display of the month
*1
:
The display of the moon status is linked to the settings of the date, month and year. The display can
show the following moon statuses:
New moon Full moon
Waxing crescent Waning moon
First quarter Last quarter
Crescent Ashen moon
*2
:
By repeatedly pressing the MAX/MIN button, the following data will appear in the display in order:
1 maximum outdoor temperature
2 minimum outdoor temperature
3 maximum outdoor humidity
4 minimum outdoor humidity
5 maximum indoor temperature
6 minimum indoor temperature
7 maximum indoor humidity
8 minimum indoor humidity
9 maximum wind chill
10 minimum wind chill
The upper right part of the display shows on which day and at what time the concerned minimum or
maximum value was measured.
Press and hold the MAX/MIN button for 2 seconds to erase this memory
2 3
9
4 51
10
6
7
11
8
11 maximum heat index
12 minimum heat index
13 maximum dew point temperature
14 minimum dew point temperature
15 maximum air pressure
16 minimum air pressure
17 maximum average wind speed
18 maximum wind gust speed
19 maximum rainfall
To Next Page
Loading...
Need help?
General
