Aleko HTIO2BLD - Assembly Instructions; Connect and Use Inflation Hose

Figure 1
Fig. 2
Fig. 3
Fig. 4
5. Remove the inflation hose and screw the valve tight.
6. Remove the inflation hose from the air outlet and screw the valve cap tight.
8
6
2. Open the air outlet on the spa. Screw one end of the inflation hose into it (Fig. 2).
3. Open the air inlet valve on the spa. Connect the other end of inflation hose into the air inlet
valve (Fig. 3).
4. Inflate the spa tub by pressing the BUBBLE button. When the spa is
properly inflated, press the BUBBLE button to shut off the bubbles.
Attention : Do not overinflate.
ASSEMBLY
1. Unfold the spa from the packaging. Spread the spa on the Ground Sheet (Part h)
provided. Make sure that the surrounding sharp objects are cleared.