HEATER Key - On/Off key for the hea
and the red indicator lamp will be on. Press again and the hea
turn off. When the hea FILTER key will also be on
and the filter pump will start working as well. When the hea
will be con
occurrence required by the design. When the preset temperature has been reached, the hea
system will stop working, but the hea
to operate, with the indicator light on. When the water falls 2°C below the preset temperature, the
hea
8
/
Press
button for increasing/ decreasing temperatures.
W
hen then setting is finished,
press “
TEMPER
ATU
RE
”
button again to end it.
The temperature can be set in the range of 68°F~ 104 F.
Note:
To Next Page
Loading...