How to return my Alesis DG8 Musical Instrument to concert pitch?
If your Alesis DG8 Musical Instrument is not playing at concert pitch, it is possible that the keyboard has been transposed. To correct this, press the TRANSPOSE button, then play Middle C to set the transpose to +00.
What to do if my Alesis DG8 Musical Instrument has no sound?
If your Alesis Musical Instrument is not producing any sound, there could be several reasons. First, check if the VOLUME slider is turned down or if the volume pedal (if in use) is at its minimum position; if so, raise the VOLUME slider or volume pedal. Also, ensure that the speakers are turned on using the switch on the back panel. If you are using a master MIDI controller, verify that the MIDI Volume on the controller is not set to 0. Finally, check that Local Control is turned on.
How to fix Alesis DG8 Musical Instrument display when it doesn't light up?
If the display of your Alesis Musical Instrument does not light up when you turn the power switch on, it is likely due to a power issue. Check that the power cable is properly plugged in.
Why are notes stuck on my Alesis DG8?
If notes are stuck on your Alesis Musical Instrument, it may be because the MIDI sequencer or controller sent an incomplete MIDI message. Try stepping on the sustain pedal and releasing it. Alternatively, you can select the Basic MIDI Channel page and set MIDI to off.
What to do if I hear Reverb/Chorus on my Alesis DG8 when the sliders are down?
If you hear Reverb and/or Chorus on your Alesis Musical Instrument even when their sliders are down, it means that a MIDI sequencer or controller sent a message to increase these levels. To resolve this, move the REVERB or CHORUS slider a little to re-activate it, then set the amount as desired.
Why is my Alesis Musical Instrument out of tune with other devices?
If all programs on your Alesis Musical Instrument are out of tune with external MIDI devices or other instruments, it's likely that the Master Tune has been changed. Adjust Master Tune.
How to fix no layer sound on my Alesis Musical Instrument?
If the layer sound cannot be heard on your Alesis Musical Instrument, the LAYER LEVEL slider is likely down. Raise the LAYER slider to increase the volume of the layer sound.
What to do if split sound cannot be heard on my Alesis Musical Instrument?
If the split sound cannot be heard on your Alesis Musical Instrument, it means that the SPLIT LEVEL slider is down. Raise the SPLIT slider to increase the volume of the split sound.
Why are piano programs on my Alesis DG8 out of tune?
If non-layered piano programs on your Alesis Musical Instrument are out of tune with external MIDI devices or other instruments, Stretch Tuning is likely turned on. Turn it off.
Why does my Alesis DG8 Musical Instrument sound tinny?
If your Alesis DG8 sounds chorused or tinny even when the chorus fader is down, it could be due to MIDI Echo being turned on in a MIDI sequencer, or the DG8’s Local Control is still on while using a MIDI sequencer. Turn Local Control off in the DG8 or turn MIDI Echo off in the sequencer or computer.
General| Brand | Alesis |
|---|---|
| Model | DG8 |
| Category | Musical Instrument |
| Language | English |
Explains how to connect power, pedals, and external audio/MIDI equipment.
Basic steps to power on the DG8 and start playing sounds.
Details on selecting sounds in Single, Layer, and Split modes.
Explains the function of various control panel elements like sliders and buttons.
Setting the DG8's MIDI channel for communication with other devices.
Explains the internal structure of sound programs (Keyboard Banks, Bass Banks).
Steps for choosing and arranging internal sound programs.
How to use optional QCards for expanded sound libraries.
Detailed explanation of the DG8's physical controls and their functions.
How the DG8 handles MIDI communication and channel assignments.
A table detailing the DG8's MIDI message support.
Instructions on who to contact for product servicing.
Steps for obtaining warranty repair service.
To Next Page
