Alesis DM5Pro Kit User Manual

Professional Electronic Drum Kit with Alesis Surge Cymbals
QUICKSTART ASSEMBLY MANUAL
GUÍA RÁPIDA DE ARMADO
GUIDE D’ASSEMBLAGE RAPIDE
MANUALE RAPIDO DI MONTAGGIO
AUFBAUANLEITUNG

Alesis DM5Pro Kit Specifications

General

Brand	Alesis
Model	DM5Pro Kit
Category	Drums
Language	English

Summary

ASSEMBLING THE DRUM RACK

Step 1: Lay horizontal tubes on ground.

Connect horizontal tubes with metal rods using drum key.

Step 2: Adjust rods and slide tube connectors.

Adjust rod position and slide connectors on horizontal tubes.

Step 3: Lay vertical tubes (M and N) on ground.

Connect vertical tubes with metal rods using drum key.

Step 4: Adjust rod and slide clamp on vertical tubes.

Adjust rod position and slide clamps on vertical tubes.

Step 5: Insert vertical tubes into horizontal connectors.

Connect vertical tubes into the connectors of horizontal tubes.

Step 6: Connect horizontal rods to vertical tube clamps.

Secure horizontal tube rods to vertical tube clamps with drum key.

Step 7: Attach center rack tube (O).

Step 8: Attach short tubes (P) to left vertical tube.

Step 9: Attach longer tube (Q) to right vertical tube.

Step 10: Attach remaining rods to center rack tube.

MOUNTING THE CYMBALS

Step 1: Connect cymbal rods to rack.

Step 2: Attach cymbals to their rods.

MOUNTING THE DRUM PADS

Step 1: Connect L-shaped rods to drum pads.

Step 2: Connect pads to rack via rods and clamps.

Step 3: Mount remaining pads, including dual-zone snare.

PLACING THE PEDALS

Step 1: Position bass drum pad and attach steel rods.

Step 2: Position bass drum pad and hi-hat pedal.

Step 3: Attach bass drum pedal to pad base.

MOUNTING THE DM5 MODULE

Step 1: Attach rack-mount rods to DM5 module.

Step 2: Attach DM5 module to the center drum rack.