Alesis Micron - Editing on the Micron; Entering Editing Mode; Cycling and Accepting Parameters; Resetting Parameters to Default

9
Editing on the Micron
Right out of the box, the Micron offers all the great sounds and operation that
most users will ever want. But, if you’re a power user, you’ll find a wealth of easy-
to-access editing capabilities.
To dig deep into the Micron’s capabilities, push the clear control knob to edit the
parameters associated with the current operating mode (programs, setups,
config, patterns, or rhythms). The current mode’s light will glow red once you
begin editing.
Turn the control knob to cycle through various
parameters. Push and turn the knob to edit; push
once more to accept your changes.
Push the control knob twice in quick succession to reset
a parameter to its default (factory) value.
For much more detail on editing, see the reference manual.
The [store] button lights when
you have made edits. Press
it to save your changes.