Alesis MultiMix USB 8 User Manual

Confidential Alesis Service Manual 8-31-0155-B
ALESIS
MultiMix USB 8
(XU1)
Service Manual
P/N: 8-31-0155-B
The information in this document contains privileged and confidential information.
It is intended only for the use of those authorized by Alesis. If you are not the
authorized, intended recipient, you are hereby notified that any review,
dissemination, distribution or duplication of this document is strictly prohibited. If
you are not authorized, please contact Alesis and destroy all copies of this
document. You may contact Alesis at servicemanuals@alesis.com or at
support@alesis.com.
Copyright Alesis, LLC
ATTENTION!
THIS DOCUMENT CONTAINS SENSITIVE
PROPRIETARY INFORMATION.
ALL RECIPIENTS MUST HAVE A CURRENT
NON-DISCLOSURE AGREEMENT ON FILE
WITH ALESIS, LLC.
DO NOT MAKE ILLEGAL
COPIES OF THIS DOCUMENT

Alesis MultiMix USB 8 Specifications

General

Number of Channels	8
Mic Preamps	4
Phantom Power	Yes
Inputs - Mic Preamps	4 x XLR
Aux Sends	1
Type	Analog Mixer
USB Audio Interface	Yes
Inputs - Line	4 x 1/4" TRS
Headphone Output	1 x 1/4" TRS

Summary

Preface

Warnings

Regarding the Power Supply Fuse

Cautionary advice on replacing fuses to prevent fire or electrocution.

Regarding the Internal Battery

Cautionary advice on replacing internal batteries to prevent explosion.

Safety Instructions

Damage to the Product

Situations requiring qualified service personnel for product damage, including liquid spills or performance changes.

Schematic and PCB Files

Disassembly Procedures

Removal of Screw/Washer

Procedure for removing screws and washers from the front panel assembly.

Removal of Front Panel/Main PCB Ass'y

Procedure for detaching the front panel and main PCB assembly.

Removal of Top Panel/Bottom Plate

Procedure for removing the top panel and bottom plate by taking off knobs and screws.

Removal of Fixed Plate/Bottom Plate

Procedure for detaching the fixed plates and bottom assembly from the front panel.

Removal of Screw/Bottom Plate

Procedure for removing screws from the bottom plate assembly.

Removal of Power PCB Ass'y/Bottom Plate

Procedure for removing power PCB and associated parts from the bottom plate.

ECN History

BOM

XU1 BOM LIST