Need help?Do you have a question about the Alesis MULTIMIX8 USB2.0 and is the answer not in the manual?
General| Type | Analog Mixer with USB Interface |
|---|---|
| Channels | 8 |
| USB | USB 2.0 |
| Mic Preamps | 4 |
| Phantom Power | Yes |
| Inputs - Mic Preamps | 4 x XLR |
| Aux Sends | 1 |
| Inputs - Other | 2 x RCA |
| Headphone Output | 1/4" |
| EQ Bands | 3-band |
| Inputs - Line | 4 (1/4" TRS) |
A greeting and overview of the manual's purpose and the Alesis brand.
Details on the mixer's features and its place in the Alesis product line.
Lists the main technical specifications and capabilities of the MultiMix USB2.0.
Explains the structure and content of each chapter in the manual.
Diagram showing connections for live performance and recording setup.
Guidelines for selecting appropriate XLR, 1/4", RCA, and USB cables for connections.
Step-by-step procedure to set channel gain levels to prevent distortion and clipping.
Overview of rear panel connections including mic, line, aux, and output jacks.
Explains controls like Level, Pan, Peak LED, Aux, and EQ for individual mixer channels.
Covers controls for overall mix level, routing, and monitoring signals in the master section.
Details the rear panel connections including power, USB, and input/output ports.
Describes the Program Selection Knob, LED Display, CLIP Indicator, and SIG Indicator.
Lists and describes various built-in effects like Hall, Room, Plate, Chorus, Delay, etc.
Describes a basic setup for live sound reinforcement using the mixer.
Explains how to integrate external audio sources via 2-TRACK IN and AUX RETURNS.
Outlines a basic recording setup without computer use, using the 2-TRACK OUT.
Step-by-step guide for installing drivers and connecting the MultiMix to computer systems.
Guide to setting the MultiMix as default audio device in Windows and disabling system sounds.
How to configure Cubase and other ASIO applications for recording with the MultiMix.
Guide to configuring the MultiMix for use with CoreAudio on Mac OS X.
Troubleshooting common issues like no output or distorted audio signals.
Addressing unwanted hum, interference, and low/no sound from channels.
Solutions for non-functioning internal effects or non-working LED meters.
Resolving issues with external effects and computer recognition problems.
Detailed specs for input sensitivity, output levels, gain ranges, and headphone output.
Specifications for EQ bands, high-pass filter, and aux send gain.
Minimum PC and Macintosh system requirements for using the MultiMix USB2.0.
Technical details on the mixer's physical size and weight.
Visual representation of the mixer's internal signal paths and component connections.
Definitions for common terms encountered while using the MultiMix USB2.0.
Information on how to contact Alesis, including email, website, and mailing address.
Listing of registered trademarks and copyright information for the product.
To Next Page
