Need help?Do you have a question about the Alesis ADAT-M20 and is the answer not in the manual?
General| Type | Digital Multitrack Recorder |
|---|---|
| Tracks | 20 |
| Recording Media | S-VHS Tape |
| Bit Depth | 16-bit |
| Frequency Response | 20 Hz - 20 kHz |
| USB | No |
| Ethernet | No |
| Word Clock I/O | Yes |
| Display | LCD |
| Sample Rate | 44.1 kHz |
| Inputs | 8 x XLR/TRS combo |
| Outputs | 8 x analog (XLR/TRS combo) |
| Digital I/O | ADAT optical |
| Sync | ADAT Sync |
| Transport Controls | Play, Stop, Record |
| Sync Options | ADAT Sync |
| MIDI I/O | In |
| Phantom Power | Yes |
| Dimensions | 19" x 5.25" |
Identifies safety symbols within the manual for user awareness.
Lists essential safety guidelines for operating the Alesis M20 device.
Outlines the key features and specifications of the Alesis M20 recorder.
Details the procedure for safely connecting the M20 to a power source.
Describes the buttons, displays, and controls on the M20's front panel.
Details the various input and output ports located on the M20's rear panel.
Explains the use of the numeric keypad for data entry and parameter editing.
Guides users on selecting the appropriate sample rate for tape formatting.
Provides step-by-step instructions for initializing a new tape.
Defines the 10 tracks available on the M20 and their primary functions.
Explains how to arm tracks for recording and the associated indicator lights.
Choosing between ADAT Optical, I/O Card, or Track Copy for digital input.
Details how to route digital and analog audio signals to tape tracks.
Explains the different modes (ABS, Relative, SMPTE) for the tape counter.
Describes using the jog/shuttle wheel for precise tape navigation and search.
Procedures for setting, selecting, and naming locate points.
Guides selection of the master clock source for system synchronization.
Details enabling and configuring SMPTE chase for synchronization purposes.
Configures the format and resolution for digital audio output signals.
Defines how the Search mode is activated on the M20.
Guide for setting up and synchronizing multiple M20 units in a system.
Instructions for updating the M20's operating system via MIDI.
Fundamental principles of synchronizing audio and video equipment.
Ensures all system components use a single, unified clock source for stability.
Provides steps and recommendations for cleaning the M20's ADAT heads.
Offers routine maintenance tasks and advice for servicing the M20.
Lists common error messages related to the M20's play state operations.
Details error messages associated with tape identification and calibration.
Explains M20 operation as an RS-422 slave device with Sony 9-pin control.
Describes the remote loading function for partially inserted cassettes.
To Next Page
