Need help?Do you have a question about the Alesis ADAT-LX20 and is the answer not in the manual?
General| Brand | Alesis |
|---|---|
| Model | ADAT-LX20 |
| Category | Recording Equipment |
| Language | English |
Instructions for connecting the ADAT LX20 to an AC power source.
Details on connecting analog audio sources and outputs.
Information on establishing digital audio links using optical cables.
Overview of the front panel buttons and their functions.
Recommendations for selecting suitable tape media for the LX20.
Explanation of the tape formatting process for ADAT compatibility.
Procedure for turning on the LX20 and inserting a tape.
How to configure the LX20 for different tape lengths (ST-60, ST-120, etc.).
Detailed steps for formatting a new or used S-VHS tape.
Step-by-step guide to the tape formatting process.
Configuring analog input routing for 2, 4, or 8 bus mixers.
Functions of the transport buttons for tape movement.
Process of automatically searching for and parking at tape points.
Methods for manually entering and exiting record mode.
Setting up automatic punch-in and punch-out points.
Configuring the LX20 for various digital output transfer scenarios.
Procedure for connecting and synchronizing multiple ADAT units.
Controlling and interacting with machines in a master/slave configuration.
Transferring audio digitally between ADAT machines.
Procedure for creating digital backups of LX20 tapes.
Using the LX20 as a 6-track recorder and 2-track mixdown unit.
Connecting the LX20 to hard disk recorders via the optical interface.
Strategies for backing up multitrack digital audio data.
Initial steps to resolve erratic behavior or freezes.
Procedures and recommendations for cleaning ADAT heads.
Guidelines for handling and preserving ADAT tapes.
Instructions for contacting Alesis for product repair.
Reference for common error messages and their causes.
To Next Page
