Why is there no audio from the outputs of my Alesis Recording Equipment?
If you're getting no audio from the outputs of your Alesis Recording Equipment, first ensure that the input source is working, or try programs that don’t require input. Then, check all your cable connections, and the level of the mixer or amp connected to the airFX. Replace the cables if they are bad. Finally, verify that the power is connected.
What to do if there is a buzz from the outputs of my Alesis Recording Equipment?
If you're hearing a buzz from the outputs of your Alesis Recording Equipment, it could be due to several factors. First, ensure that the airFX and its audio cables are kept away from power cables, power transformers, and wall warts. If that doesn't solve the issue, replace the cable with a new, high-quality cable. As an additional check, bypass the airFX by connecting the input cables directly to the output cables to see if the problem persists with the source.
Why is there no effect on my Alesis Recording Equipment?
If your Alesis Recording Equipment isn't producing any effect, it might be because the Hold feature is active. If you see a decimal point between the numbers, hold the Program knob until it disappears. Alternatively, you may not be close enough to the Axyz sensor, or the effect might be too subtle. Try moving your hand closer to the sensor or switching to a different program.
Why is the Axyz controller not as sensitive as it should be on my Alesis Recording Equipment?
If the Axyz controller on your Alesis Recording Equipment is not as sensitive as it should be, the issue might be due to infrared interference. Try shading the airFX from any IR sources. Another potential cause is excessive smoke. If there's a fog machine or cigarette smoke nearby, try relocating the airFX.
How to fix program change issues on Alesis Recording Equipment?
If you can't change programs on your Alesis Recording Equipment, the issue may be a software problem. Try unplugging the airFX and plugging it back in to reset it.
General| Brand | Alesis |
|---|---|
| Model | airFX |
| Category | Recording Equipment |
| Language | English |
Lists essential safety precautions for product usage and installation.
Basic instructions for connecting the airFX and audio sources.
Guide on how to choose and load sound programs using the control knob.
Explains the general requirements for connecting the airFX to audio equipment.
Guide to choosing and loading one of the 50 available sound effect programs.
Explains the hand-gesture controller for manipulating effects in real-time.
A table to help diagnose and resolve common operational problems.
To Next Page
