4
PAD ARRANGEMENT
Below is a diagram describing how the pads correspond to most of the sounds from each kit. This diagram also shows
which MIDI note number the Performance Pad will transmit when controlling an external device via MIDI.
HIGH TOM LOW TOM
CRASH
CYMBAL
RIDE
CYMBAL
MIDI NOTE
#48
MIDI NOTE
#45
MIDI NOTE
#49
MIDI NOTE
#51
BASS KICK
DRUM
SNARE
DRUM
CLOSED HI-
HAT
OPEN HI-
HAT
MIDI NOTE
#36
MIDI NOTE
#38
MIDI NOTE
#42
MIDI NOTE
#46
If you are using an external footswitch (sold separately) connected to the KICK input on the back of the Performance Pad,
pressing it down will generate a bass kick drum and MIDI note #36.
If you are using an external footswitch (sold separately) connected to the HI-HAT input on the back of the Performance
Pad, pressing it down will simulate the behavior of a closed hihat and generate a closed hi-hat sound (MIDI note #42) evry
time it is pressed down. While the footswitch is pressed down, hitting the OPEN HI-HAT pad will generate a closed hihat
sound (MIDI note #42). When you release the footswitch, hitting the OPEN HI-HAT pad will generate an open hihat
sound.
NOTE: For best results, strike the middle of the pad. Striking the edge of the pad could
result in the triggering of an adjacent pad.
To Next Page
Loading...
Need help?
General
