Editing Effects
96 QuadraSynth Reference Manual
This differs from Configuration #1 in many ways. In this Configuration, there is only
one Delay effect, two Pitch effects and two Reverb effects. Effect send 1 is routed
through the mono Delay, then a stereo Pitch effect, and finally a stereo Reverb effect.
Send 2 has no effects of its own, but can be routed to the same Reverb effect as send
1. Send 3 is routed through a mono Pitch effect, and then a stereo Reverb effect. Send
4 has no effects of its own, but can be routed to the same Reverb effect as send 3.
Effect send 1Õs Delay, Pitch, and Reverb can feed the Mix output directly. Unlike the
first configuration, however, Pitch 3 can be routed to the Mix only after passing
through Reverb 3.
To Next Page
Loading...
