Description of Controls
X2 Reference Manual 77
MUTE Buttons
The MUTE buttons disconnects the Group’s signal from the Master outputs, the
GROUP OUT jacks and the TAPE OUT jacks. When pressed, the MUTE button’s
LED will light. This can be controlled via the Dynamic Mute Automation system,
which gives it other functions as well (see Chapter 5).
Group 1—8 Master Faders
The 8 Group Master FADERS adjust the total output level of all signals assigned to
the Group. They get their signal from the ASSIGN switches in the Channels and the
Stereo Aux Returns. They send signal to the 8 GROUP output jacks and the ASSIGN
LEFT and ASSIGN RIGHT buttons.. They also send to the equivalent numbered
Channels’ TAPE OUT jack (Group 1 to Channels 1, 9, and 17; Group 2 to Channels
2, 10, and 18; etc.). The FADER is at unity gain when all the way up.
To Next Page
Loading...
