EasyManua.ls Logo

Alfano PRO - SAFETY MEASURES; PRODUCT ALTERATIONS; GUARANTEE

Alfano PRO
8 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Quit record mode and return to the lap timer mode for ALFANO PRO
Simply press both push buttons for 2 seconds at any time.
NOTE:
When the ALFANO PRO is working with the new option the system loses all recorded data in lap timer mode, since the complete memory
must be empty when the option is used. Similarly, all recorded data, in RECORDING MODE “rec”, is also deleted when the ALFANO
PRO quits the RECORDING MODE “rec”.
The following options are available in the RECORDING MODE “rec”: RPM counter (D Reading), engine running time, engine number,
engine temperature and the alarm for the engine temperature.
SAFETY MEASURES
In mounting the ALFANO, pay attention that the back side of the housing does not come into contact with the steering wheel so as to avoid
damaging the housing.
In changing the battery, pay attention that the screws are not over-tightened. Tighten to the point where both sections of the housing meet.
Battery used:CR2450
Application of the protective caps is absolutely REQUIRED if one of the electrical contacts is not being used in order to insure that your
ALFANO electrical contacts remain clean and watertight.
In heavy rain the electrical contacts should be protected against water entry in order to insure the defect-free operation of your ALFANO. If
water has already leaked in, the danger exists that the ALFANO will no longer receive impulses from the magnetic strips which could
result in a faulty engine temperature display. The contacts then only need to be dried in order for the system to function again.
6° TRACKS WITH MAGNETIC STRIPS
Have a look at our Web site at : www.alfano.be
7. PRODUCT ALTERATIONS
The functional descriptions in this handbook are solely for information purposes. In order to keep up with the latest technical
developments the manufacturer reserves the right to undertake alterations in the functional method of the devices at any time without prior
notification of the customer.
8° GUARANTEE
The product is intended for competition purposes. All electronic breakdowns, breakages in the housing, and damaged cables which are
attributable to a collision or are not covered under the guarantee. Equally, the guarantee is also canceled if the device has been opened.
Only the manufacturer can decide as regards liability in the event of damages or defects of any kind. A guarantee of one year is granted
for manufacturing defects (the invoice date applies).
Have a safe race

Related product manuals