EasyManua.ls Logo

alfen Eve Single Pro-Line User Manual

alfen Eve Single Pro-Line
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EV Charging Stations
User Manual
-
Eve Single Pro-line & S-line

Other manuals for alfen Eve Single Pro-Line

Question and Answer IconNeed help?

Do you have a question about the alfen Eve Single Pro-Line and is the answer not in the manual?

alfen Eve Single Pro-Line Specifications

General IconGeneral
Suitable only for adults-
Number of phases3
Power consumption (standby)4.1 W
Maximum operating current per phase32 A
Three-phase output voltage supported400 V
Maximum operating power (three-phase)22 kW
Single-phase output voltage supported230 V
Maximum operating power (single-phase)7.4 kW
Housing colorWhite
Mounting typeWall
Built-in displayYes
Display diagonal3.5 \
Housing materialPolyester
Display resolution320 x 240 pixels
Display technologyTFT
CertificationMID, TLS 1.2 x509 2048/4096
Sockets quantity1
Languages supportDEU, DUT, ENG, ESP, FIN, FRE, ITA, NOR, POR, SWE
Quantity per pack1 pc(s)
Supported protocolsTN-S, TN-C-S, TT, IT
IEC protection classI
Grounding system supportedIT, TN-C, TN-C-S, TT
Mechanical impact protection codeIK10
International Protection (IP) codeIP55
Operating temperature (T-T)-25 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth130 mm
Width240 mm
Height370 mm
Weight4000 g
Package depth250 mm
Package width315 mm
Package height460 mm
Package weight4500 g

Summary

2. SAFETY AND USAGE INSTRUCTIONS

2.1 Responsibilities of the owner and/or operator

Outlines owner and operator duties for safe charging station use and general precautions.

2.2 Intended use

Specifies the intended purpose, authorized usage scenarios, and operating conditions for the charging stations.

3. PRODUCT OVERVIEW

3.1 Exterior view

Provides visual identification and distinct features of the Eve Single Pro-line and S-line charging station models.

3.2 Bottom view

Details the components and layout found on the bottom of the charging station unit.

3.3 Identification label

Explains the information presented on the charging station's identification label, including ratings and certifications.

3.4 User interface

Describes the user interface elements, LED indicators, and display symbols for operation status.

4. OPERATION

4.1 Socket model: Start charging with charge card

Step-by-step instructions for initiating an EV charging session using a charge card on socket models.

4.2 Socket model: Stop charging with charge card

Step-by-step instructions for ending an EV charging session using a charge card on socket models.

4.3 Socket model: Start charging with Plug&Charge

Procedure to initiate an EV charging session via Plug & Charge on socket model charging stations.

4.4 Socket model: Stop charging with Plug&Charge

Procedure to end an EV charging session via Plug & Charge on socket model charging stations.

4.5 Fixed cable model: Start charging with charge card

Instructions for starting an EV charging session using a charge card with fixed cable models.

4.6 Fixed cable model: Stop charging with charge card

Instructions for stopping an EV charging session using a charge card with fixed cable models.

4.7 Fixed cable model: Start charging with Plug&Charge

Procedure to initiate an EV charging session using Plug & Charge with fixed cable models.

4.8 Fixed cable model: Stop charging with Plug&Charge

Procedure to end an EV charging session using Plug & Charge with fixed cable models.

5. MAINTENANCE

6. ERROR CODES AND TROUBLESHOOTING

7. WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE)

Related product manuals