Need help?Do you have a question about the alfen Eve Single S-Line and is the answer not in the manual?
General| RFID reader | Yes |
|---|---|
| Sockets quantity | 1 |
| Languages support | DEU, DUT, ENG, ESP, FIN, FRE, ITA, NOR, POR, SWE |
| Power source type | - |
| Quantity per pack | 1 pc(s) |
| Grounding system supported | IT, TN-C, TN-C-S, TT |
| Mechanical impact protection code | IK10 |
| International Protection (IP) code | IP55 |
| Housing color | White |
| Mounting type | Wall |
| Built-in display | No |
| Housing material | Polycarbonate (PC) |
| Number of phases | 3 |
| Power consumption (standby) | 4.1 W |
| Three-phase output voltage supported | 400 V |
| Maximum operating power (three-phase) | 11 kW |
| Single-phase output voltage supported | 230 V |
| Maximum operating current (three-phase) | 16 A |
| Operating temperature (T-T) | -25 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
Weight and Dimensions| Depth | 138 mm |
|---|---|
| Width | 242 mm |
| Height | 373 mm |
| Weight | 4000 g |
| Package depth | 250 mm |
| Package width | 320 mm |
| Package height | 470 mm |
| Package weight | 4500 g |
Defines the intended use and audience for the manual.
Provides critical safety instructions to prevent electrical shock, fire, and injury.
Outlines Alfen's liability regarding product use and modifications.
Overview of the Eve Single charging station's components and features.
Details on the status indications for S-line and Pro-line models.
Explains LED indicators for S-line models' status and errors.
Describes the display information and symbols for Pro-line models.
Sequences for starting and stopping charging with different authorization methods.
How to manage local user access using RFID Master Keys on Pro-line models.
Step-by-step guide for setting up the Master Key for RFID access control.
Process for managing user access passes via the Master Key.
Instructions for removing the Master Key using the Service Installer application.
Detailed technical data for Eve Single S-line and Pro-line models.
List of Eve Single models with article numbers and OCPP identifiers.
Comparison table of features for S-line and Pro-line product lines.
Specific operational and technical details for the S-line model.
Specific operational and technical details for the Pro-line model.
Common specifications including outlets, power systems, and protection features.
Details on supported communication methods and protocols.
Information regarding SIM card, authentication, and data security.
Capacity for storing charge passes, transactions, and diagnostic logs.
Environmental and safety ratings for operating the charging station.
Details on the charging station casing, dimensions, material, and mounting options.
Guidelines for electrical input, cable sizing, and protection requirements.
Specifications for external protection devices required for EV/ZE-Ready compliance.
Configuration options available at the factory for authorization and charging.
List of available accessories such as mounting posts and charging cables.
Core instructions for installing and connecting the charging station.
Essential requirements for assembling and installing the charging station.
Details on the physical mounting and tools required for installation.
Step-by-step guide for the electrical wiring and connections.
Crucial safety checks to perform before commissioning the station.
Procedure for powering up and self-diagnostics for S-line models.
Procedure for powering up and self-diagnostics for Pro-line models.
Overview and preparation for using the Service Installer application for configuration.
Guide to navigating and utilizing the Service Installer application's features.
Instructions for changing the display language on Pro-line models.
How to activate new functionalities using the Service Installer.
Information on connecting to third-party and Alfen management systems.
Details on establishing wireless and wired network connections.
Steps for setting up a wireless GPRS connection for Pro-line models.
Instructions for connecting the station via a UTP Ethernet cable.
Guide to registering for Alfen's ICU EZ management services.
Overview of remote management capabilities for charging station settings.
Procedure for integrating the station with non-Alfen management systems.
Details on default settings for active load balancing functionality.
Network settings required for Modbus TCP/IP communication with smart meters.
Default configurations for the Smart Charging Network.
Explanation of the Smart Charging Network functionality.
Steps to add charging stations to an existing Smart Charging Network.
Configuration steps for Smart Charging Network with different connection types.
To Next Page
