Need help?Do you have a question about the alfen Eve Single S Series and is the answer not in the manual?
General| Charging Mode | Mode 3 |
|---|---|
| Connector Type | Type 2 |
| Authentication | RFID, App |
| Enclosure Rating | IP54 |
| Impact Resistance | IK10 |
| Dynamic Load Balancing | Yes |
| Smart Charging | Yes |
| Product Type | Electric Vehicle Charging Station |
| Input Voltage | 400 V AC |
| Communication | Ethernet |
| Mounting | Wall or pole mount |
| Weight | 4 kg |
| Cable Length | 5 m (standard) |
| Compatibility | All Type 2 Electric Vehicles |
| Charging Power | Up to 22 kW |
Defines the manual's target audience and purpose for safe installation and operation.
Outlines critical safety instructions and potential hazards to prevent electrical shock, fire, or injury.
States Alfen's liability regarding product modifications and customer customization.
Provides an overview and images of the Eve Single S-line and Pro-line charging stations.
Describes the S-line Status LED and Pro-line colour display for user interaction and status indication.
Explains the sequence of user actions and status indications for Plug & Charge and RFID authorization.
Details how to install and manage RFID Master Keys for local user access control.
Compares the features and specifications of the S-line and Pro-line Eve Single models.
Lists available accessories for the Eve Single charging station, including charging cables and mounting hardware.
Provides technical details for installation, including cable diameters, short-circuit, and residual current protection.
Emphasizes critical safety instructions for electrical installation and handling the charging station.
Lists the essential requirements and conditions for correctly installing the Eve Single charging station.
Guides on site preparation, checking delivery scope, and downloading the Service Installer application.
Lists the necessary tools required for installing the charging station.
Outlines the conditions that must be met before starting the installation procedure.
Details the steps for the physical mounting and initial setup of the charging station.
Provides general warnings and safety precautions for electrical installation work.
Explains the specific electrical connections for single-phase installations of the Eve Single S-line and Pro-line.
Details the electrical connections required for three-phase installations of the Eve Single S-line and Pro-line.
Describes options for connecting data cables for smart meters and networks.
Lists crucial safety instructions to follow before activating the charging station.
Outlines the self-diagnostic steps and readiness indicators for S-line models.
Details the self-diagnostic process and display messages for Pro-line models.
Explains how to use the Service Installer application for advanced configuration and settings.
Introduces backoffice systems for remote monitoring, control, and maintenance of charging stations.
Guides on establishing wireless (SIM card) and wired (UTP Ethernet) connections for network access.
Covers remote management of charging station settings via backoffice systems.
Explains the process of registering charging station models with non-Alfen management systems using OCPP.
Details requirements and parameters for active load balancing with smart meters.
Explains the Smart Charging Network (SCN) functionality and how to add stations to it.
To Next Page
