Safety
instructions
&
&
~
During
drilling
operations on
walls
and ceilings, the metal core
drilling
machine
must
be
safeguarded
with
the included safety chain. The magnetic adhesion is
not
maintained In case
of
a failure
of
circuit.
The
cut
core will be ejected automatically
by
the ejector pin. The ejector pin
could
possibly
break in case
of
improper use.
Only use undamaged power cord and extension cords and regularly check on damages.
Danger
of
an electric shock!
Power
supply
and voltage details at the device
must
correspond.
When working
with
this device, wear the following protection equipment:
Safety goggles, appropriate footwear, ear protection, hair net
{for
long hair),
possibly
also apron
and safety helmet.
The place
of
installation
for
the magnet
foot
must be clean and rustfree. Remove lacquer and
filler.
Do
not
execute any electric welding
on
the workpiece
on
which
the Metal Core Drilling Machine
is used.
Prior
to
all operations
mount
coolant unit.
Specified conditions
of
use
This device
is
destined to cut material with magnetisable surface with core cutters and twist drills
in
sheltered
environment for commercial use
in
industry and craft. The device is suitable for drilling vertical, horizontal and
overhead.
To Next Page
Loading...
