To Next PageTo Next Page
Need help?Do you have a question about the ALIBI ALI-DVR3004H and is the answer not in the manual?
Details FCC compliance, conditions, and related cautions for the equipment.
Notes special handling requirements for perchlorate material found in the device.
Specifies the type of grounding plug and connector required for the power cord.
Lists important tips for safe operation and maintenance of the DVR.
Describes the front panel controls, connectors, and indicator LEDs for the DVR system.
Details the items included in the system package and what users need for installation.
Provides essential guidelines for installing the DVR unit, including placement and environmental considerations.
Step-by-step instructions for physically connecting and setting up the DVR and its display monitor.
Offers general guidelines and considerations for mounting and connecting surveillance cameras to the DVR.
Guides users through the process of connecting all system components and performing the initial setup.
Explains how to navigate and utilize the DVR's menu system for configuration and advanced functions.
Details how to manage and configure the Hard Disk Drive (HDD) for recording and storage.
Describes how to set up and manage system-related alarm conditions and their responses.
Provides instructions for properly powering on, shutting down, and rebooting the DVR device.
Explains the functions of the quick setting toolbar available in the live view mode for rapid adjustments.
Details the options available in the live view pop-up menu accessed via a right-click on the desktop.
Guides users on setting up various recording parameters, schedules, and motion detection.
Explains how to search and play back recorded video footage by channel, event, or tag.
Details the procedures for exporting recorded video clips to external storage devices.
Provides steps for creating new user accounts with specific permissions for system access.
Explains how to remove existing user accounts from the DVR system.
Guides users on modifying existing user account details like password and permissions.
Covers basic network configuration such as IP address, gateway, and DNS settings.
Explains how to set up Dynamic DNS for remote access to the DVR.
Details how to configure the Network Time Protocol server for accurate system time synchronization.
Describes how to configure multicast settings for connecting multiple cameras.
Explains how to set up the Real Time Streaming Protocol (RTSP) for media streaming.
Details how to change the default server and HTTP port numbers for network access.
Guides users on setting up email notifications for alarms and events.
Explains how to enable Universal Plug and Play (UPnP) for easier network device discovery and connection.
Displays status reports for the DVR, cameras, network, and HDDs.
Covers how to view, search, and export system logs for troubleshooting and auditing.
Details how to back up and restore the DVR's configuration settings.
Provides instructions for updating the DVR's firmware via local device or FTP server.
Explains how to reset the DVR to its factory default settings.
Covers tools for checking network traffic, testing delay, and exporting network packets.
Guides users on how to log in to the DVR remotely via a web browser.
Describes the interface and functionality of viewing live camera feeds remotely.
Explains how to review recorded video footage remotely and download it.
Details how to view system logs remotely.
Covers how to configure DVR settings remotely via a web interface.
Recommends using high-reliability, security-grade HDDs for optimal system performance.
Provides step-by-step instructions for physically installing a hard disk drive into the DVR.
General