HOW TO INSTALL THE LONGITUDINAL FEED(X TYPE)
Adaptor
Shim washers
Bearing face
Locking nut
Shim
Anti-Vandal Switch
The indicator LED will lit up
when the power is on.
Speed control knob
Circuit breaker
Main power switch
When the current passing through the
switch is over 3.15A within 10 seconds,
it will automatically break the circuit.
To continue the operation, press down
the green-pusher and the power
indicator will glow.
"ON" position, power is "ON".
"OFF" position, power is"OFF".
3
To Next Page
Loading...