Need help?Do you have a question about the Align T-Rex 450SE V2 and is the answer not in the manual?
Explains the meaning of warning and caution symbols used in the manual.
Provides crucial safety and usage disclaimers for R/C helicopters.
Advises on choosing safe flying sites away from obstacles and people.
Recommends seeking guidance from experienced pilots for initial setup and flight.
Warns about the danger of spinning rotor blades and advises keeping a safe distance.
Stresses the importance of keeping the model dry to prevent electronic malfunctions.
Advises storing the model away from heat sources to prevent material deformation.
Emphasizes using the product only as intended and with genuine parts.
Advises operating within one's abilities and avoiding flying when tired.
Details essential pre-flight checks for frequency, power, and component security.
Details how to adjust the rudder trim to correct left/right nose deviation during hover.
Details how to adjust elevator trim for forward/backward nose deviation during hover.
Details how to adjust aileron trim for body left/right lean during hover.
Addresses issues with main rotor blade tracking and provides solutions.
Troubleshoots issues related to rotor speed and tail movement during hovering.
Provides solutions for tail wagging caused by incorrect gyro sensitivity settings.
To Next Page
General