Alimak ALC II User Manual

ALIMAK LIFT CONTROL, ALC II
ALIMAK 34815 - 1 /12
A 0
Alimak Lift Control, ALC II .............................
Semi-automatic control system .........................
Collective control system ...................................
ALC II additional features ................................
Factory calibration ..............................................
Stop / retardation distances ..............................
System set-up ......................................................
ALC II diagnose mode .......................................
Information and fault indications on displays
Programming of DOL operated lifts ...............
Programming of VFC operated lifts ..............
ALC FOR CONSTRUCTION HOISTS
Control stations for construction hoists ........
Installation ...........................................................
Power box for landings above level 20 ............
Landing extension box for landings above 32
Group control ......................................................
Operation .............................................................
ALC II FOR PERMANENT LIFTS
Push-buttons and display inside car ...............
Operation .............................................................
ALC II ADAPTED FOR LIFTS WITH
AUTOMATIC DOORS
Refer to separate publ. No. 9081 650
Operating instructions and fault indications
on displays ............................................................
Collection of illustrative examples .................
A 1
A 4
A 4
A 6
A 8
A 10
A 12
A 17
A 19
A 20
A 24
A 40
A 40
A 44
A 45
A 45
A 46
A 50
A 52
A 52
A 53

Alimak ALC II Specifications

General

Brand	Alimak
Model	ALC II
Category	Controller
Language	English