Need help?Do you have a question about the Alinco DJ-MD5 and is the answer not in the manual?
General| Zones | 250 |
|---|---|
| Analog Mode | Yes |
| Digital Protocol | DMR Tier I & II |
| Battery | Li-Ion |
| Waterproof | IP54 |
| Power Output | 5W |
| Digital Mode | DMR (Tier I & II) |
| Display | LCD |
| GPS | Yes |
| Battery Life | Approximately 12 hours |
| Channels | 4, 000 |
LED indications, programmable keys, and hot key functions.
Overview of fundamental radio operations.
Procedures for turning on the radio and adjusting audio volume.
Accessing various radio functions like Voltage, Power, Repeater, VOX, Scan.
Switching between VFO/channel modes and selecting zones/channels.
Steps for receiving, responding to, and initiating calls.
Using monitor and digital monitor for signal reception.
Advanced private call functions like Call Alert, Remote Monitor, Kill, Wake.
Enabling, checking, and transmitting GPS information.
Recording calls and using the radio as a voice recorder.
Managing contacts, messages, and call logs.
Configuring and managing scan lists for channel scanning.
Adjusting Beep, Backlight, Key Lock, Power Off.
Configuring TX Timer, Volume, MIC features, and language.
Customizing channel display, message prompts, and call rings.
Adjusting frequency step, squelch levels, and VOX settings.
Configuring scan modes, security features, and FM radio operations.
Managing DTMF, Alarms, and Start Password.
Understanding channel setup menus and types.
Setting up digital channel parameters like TX power and bandwidth.
Configuring TX allow, radio ID, color code, time slot, encryption.
Setting up analog channels: CTCSS/DCS, squelch modes.
Viewing radio ID, model, firmware, and other device details.
Performing factory reset and re-initializing the radio.
To Next Page
