Alinco DJ-MD5 - Basic Operations - Part 1; Power On and Volume Control; Radio Function Access via Menu

7
Combine ( MENU) + number key operation:
Press ( MENU) key until the LCD display “Next Please Press Dial Key”, press the
number key, it will perform the programmed function.
5. Basic Operations
5.1 Power on the radio
Turn on the radio by turning the [Power/Volume] knob clockwise till a click is heard,
LED lights green on and the LCD displays will show a start-up message, and you will
hear a beep after 8 seconds.
5.2 Adjust Volume
Rotate the [Power/Volume] knob to adjust the volume. Turn clockwise to increase the
volume and counterclockwise to decrease the volume. The LCD display will show
volume status during an adjustment.
OFF
No Function
Voltage
Check the current battery capacity voltage
Power
Switch the power between super high, high, middle and low
power
Repeater
Switch between talk around and repeater mode
Reverse
Turn on/off the frequency reverse function
Digital Encryption
Choose the encryption group to encrypt the call conversation
Call
In Analog mode, send the DTMF/5TONE/2TONE encode.
This function is only valid for analog channel
VOX
Set up the VOX level
V/M
Switch between VFO mode and memory channel mode.
Sub PTT
Sub channel PTT, press to start the call on sub channel
Scan
Scan on/off
FM
FM radio on/off
Alarm
When select alarm, long press the key to start alarm, short
press again to exit the alarm.