Alinco DJ-MD5 - Page 8

8
Record switch
Enable/disable the recording function when TX or RX a call
conversation
Record
Start/stop recording as a recorder. When stop recording, the
radio will remind repeat or send the record
SMS
In digital mode, press to enter into message box, only private
call and group call can send and receive a message
Dial
Start the manually dial
GPS
Check the GPS position information
Monitor
Monitor the weak signal in analog mode or the signal with
unmatched ID or color code in digital mode
Main channel switch
Choose channel A or channel B as the main channel
Hot key 1~6
Press the key to perform the programmed function in hot key
setup
Work Alone
Turn on/off the work alone function
Nuisance Delete
During scanning, press the key to skip the unwanted channel
Digital Monitor
In DMR mode, press the key to turn on/off monitor a target
radio
Sub CH Switch
Turn on/ off the sub channel
Priority Zone
Switch to Priority Zone
Programming Scan
Press the key to start the scan in VFO channel. The scan start
and frequency end frequency shall be programmed in PC
software.
MIC Sound Quality
In digital channel, switch the microphone tone to normal or
enhanced mode
LastCall Reply
In digital channel, press the key to access the last call and
press PTT to call back
Channel Type Switch
Switch the channel type(Analog, Digital, Ana+Dgi, Dgi+Ana)
Channel Ranging
Channel Ranging