• On all burners, make sure that PC8-PRECISION
is properly centered.
All-Clad spare-parts
• Spare-parts (lid gasket (reference SS-980919) timer,
basket and other parts) are available at your local All-Clad
approved service center.
• To have repairs performed, please call your local All-Clad
approved service center.
• Only use All-Clad genuine parts designed for your
product model.
Operating Instructions
This appliance cooks under pressure. Improper use may result in scalding injury.
Make certain unit is properly closed before operating.
Always pour a minimum amount of a liquid of at least 1 cup in the unit.
Opening
• Make sure that the cooking program selector (F) is
in the PRESSURE RELEASE - Fig. 8 position
and that the pressure indicator is down.
• Move the handle from the horizontal to the
vertical position (the jaws open): Fig. 1
• Lift the lid.
Closing
• Make sure that the cooking program Selector (F) is in the
PRESSURE RELEASE position and the Opening/Closing
handle (E) is in the vertical position.
• Place the lid on the pressure cooker, taking care to ensure
that it is correctly positioned.
• Move the Open/Close handle from the vertical to the
horizontal position. Fig. 2
• Apply a little force at the end when closing to trigger the
locking mechanism.
• Once in the closed position, it is normal that the lid can
turn freely on the PC8-PRECISION pot.
If you cannot close the lid:
• Check that the Open/Close handle is in the vertical
position.
• Check that the gasket is in place properly.
EN
3
During
Opening/Closing
operations, the control
panel must be in place on
the lid.
The jaws must be
in contact with
the edge of the
lid.
To Next Page
Loading...