Need help?Do you have a question about the Allen-Bradley 1756-CNBR/E and is the answer not in the manual?
General| Brand | Allen-Bradley |
|---|---|
| Model | 1756-CNBR/E |
| Category | Controller |
| Language | English |
Safety requirements for operating equipment in hazardous locations, including North American and European approvals.
Details on ControlLogix-XT products and their environmental capabilities, including temperature ranges.
Information on using redundant media and guidance on selecting the module's installation slot in a chassis.
Steps for setting the node address, installing the module, and connecting it to the ControlNet network.
Procedures for installing the EDS file and connecting a programming terminal via cable.
Guide for establishing communication with the module using its USB port.
Safety requirements for hazardous locations and Electrostatic Discharge (ESD) precautions.
Information on using redundant media with the 1768 ControlNet module.
Covers installation summary, grounding, node address, and module installation steps.
How to connect to the network and instructions for removing the module.
Details on running a second trunk cable for redundant media and its benefits.
Guidelines for planning a redundant media system, including cable routing and configuration.
Procedure for setting up the USB driver for RSLinx software to enable module communication.
Steps to view modules in RSLinx software after driver setup using RSWho.
Explanation of OK status and network channel status indicators for modules.
Details on OK status and network channel indicators for specific 1756 ControlNet modules.
Explanation of OK status and network channel status indicators for 1768 modules.
Detailed explanation of OK status and network channel indicator messages and their meanings.
To Next Page