Allen-Bradley 1756-CN2/B

Installation Instructions
ControlNet Modules
Catalog Numbers 1756-CN2/B, 1756-CN2R/B, 1756-CN2RXT, 1756-CNB/E, 1756-CNBR/E, 1768-CNB,
1768-CNBR

Allen-Bradley 1756-CN2/B Specifications

General

Brand	Allen-Bradley
Model	1756-CN2/B
Category	Controller
Language	English

Summary

Install a 1756 ControlNet Communication Module

ControlLogix-XT Systems

Connect a Programming Terminal to the Network with a 1786-CP Cable

Connect to the Module via the USB Port

Install a 1768 ControlNet Communication Module

Set the Node Address

Guides on setting the module's node address switches using a small screwdriver for unique network addressing.

Install the Module

Details how to mount the module on a DIN rail or using screws, emphasizing proper grounding.

Connect the Module to a ControlNet Network

Explains connecting the module to the ControlNet network using a tap or network access cable.

Remove the Module

Describes the procedure for removing or sliding a module from the chassis, emphasizing power off.

USB Communication

Set Up a USB Driver

Guides on setting up the USB driver for RSLinx software to enable USB communication with ControlNet modules.

1756 ControlNet Status Indicators

1768 ControlNet Module Status Indicators