Rockwell Automation Publication 22C-UM001J-EN-E - January 2017 109
Programming and Parameters Chapter 3
d345 [Fault 8 Time-hr] Related Parameter(s): A195
, d316
(With FRN 6.xx and later.)
Displays the value of the d316
[Elapsed Time-hr] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0/32767 Hr
Display: 1 Hr
d346 [Fault 8 Time-min] Related Parameter(s): A195, d317
(With FRN 6.xx and later.)
Displays the value of the d317
[Elapsed Time-min] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0.0/60.0 Min
Display: 0.1Min
d347 [Fault 9 Time-hr] Related Parameter(s): A195, d316
(With FRN 6.xx and later.)
Displays the value of the d316 [Elapsed Time-hr] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0/32767 Hr
Display: 1 Hr
d348 [Fault 9 Time-min] Related Parameter(s): A195, d317
(With FRN 6.xx and later.)
Displays the value of the d317 [Elapsed Time-min] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0.0/60.0 Min
Display: 0.1Min
d349 [Fault10 Time-hr] Related Parameter(s): A195, d316
(With FRN 6.xx and later.)
Displays the value of the d316
[Elapsed Time-hr] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0/32767 Hr
Display: 1 Hr
d350 [Fault10 Time-min] Related Parameter(s): A195, d317
(With FRN 6.xx and later.)
Displays the value of the d317
[Elapsed Time-min] parameter when the fault occurred.
Values Default: Read Only
Min/Max: 0.0/60.0 Min
Display: 0.1Min
To Next Page
Loading...